1.Overview:
LHM - 30 light mountain rig is a newportable drilling rig design by Sincep. Absorbing the advantages of similarforeign equipment, combined with the experience of geological explorationdrilling and made by using foreign advanced power, hydraulic components.
2.Purpose
This type of mountain rig is used forgeological exploration in complex terrain such as deserts, Gobi and mountainousareas.
3.Parts catalogue:
item | name | qty | piece mass kg | total mass kg |
(1) | engine skid:engine、frame、battery、belt wheel | 3 | 98 | 294 |
(2) | air compressor skid:air compressor、frame | 2 | 85 | 170 |
(3) | hoist skid:oil pump、oil tank、valves | 1 | 90 | 90 |
(4) | derrick:motor、chain、masts、ties、sprockets | 1 | 86 | 86 |
(5) | swivel head | 1 | 18 | 18 |
(6) | radiator assembly:radiator、frame | 1 | 25 | 25 |
(7) | base | 1 | 52 | 52 |
(8) | oil cans | 3 | 2 | 6 |
(9) | hydraulic hoses:quickly joints、hoses | 1 | 11 | 11 |
(10) Accessories: including drill pipe, drillhead, impactor, maintenance tools, etc. |
4.Advantages :
(1) Powered by three sets of importedgasoline engines, powerful, low fuel consumption, long life.
(2) Imported air compressor, small, light,large displacement and high efficiency.
(3) Extension air pipe, quick jointconnection, one transmission can complete two drilling operations.
(4) The handle controls the rotation,drilling and lifting actions.
(5) The hydraulic system is equipped withload sensitive device, which improves the cutting ability of the drilling rig,reduces the heating and improves the life of the system.
(6) The oil pump and the oil motor have noradial load, to improve the bearing life and reduce the sealing wear
(7) The swivel head has compact structure,light weight and high torque, and is suitable for drilling in
competent formation
(8) Hydraulic transmission part of thepipeline using fast joint connection suit for installation, removal conveniencein field and reduce pollution.
(9) Adopting the combined frame structure,each main component is respectively arranged in the frame, and can be carriedseparately, the largest single piece is not more than 100kg, and the wholemachine weight is about 750KG.
(10) The base has the advantages of simplestructure, convenient adjustment, fully self-locking and good stability.
5.Main tech parameters:
Drill depth : 30m
Drilling method : air drilling
Airshock drilling : 70/75mm
Drill pipe dia* length : φ60*1500mm
Swivel head rated torque : 810N.m
Drill speed : 0~140r/min
Pressurized lifting system ratedpressurizer pressure : 4800N
Rated lifting force : 1500KG
Max lift&down speed : 0.7m/s
Rated hydraulic system pressure : 20Mpa
Rate of flow : 40L/min
Engine (3 sets) output power : 24HP*3
Air compressor (2sets) type : Injectionscrew type
Displacement : 3.5~4m3/min
Pressure : 0.8Mpa
Gross Mass (without drill tools) : About 750KG